Inno3D introduces two new Turing cards, the RTX 2070 X2 OC and the RTX 2070 Twin X2. Yesterday we already published a review of the Founder’s Edition variant, and now the cards of the AIB partners are slowly arriving.
First of all, there is the 2070 X2 OC, the most luxurious version of the RTX 2070 from Inno3D. This orange card has two 92mm fans and a heat sink that holds two expansion locks, and there is also a back plate. On the back, there are the standard ports, i.e. three display ports, one HDMI port, and one USB type C port. The boost clock frequency is 1755 MHz, and the GDDR6 memory is clocked at 14 Gb per second. As far as the power connections are concerned, there are one 8-pole and one 6-pole. The card is 268 mm long and 113 mm high.
In addition, there is a less upgraded model, the RTX 2070 Twin X2. This card also has two compartments, which seem to be slightly smaller. On the back, we see the USB type-c port again, but this time the upper display port connector has been replaced by a DVI port. In addition, the heat sink is much smaller, which has the advantage that the card is much shorter; it is only 19.6 cm long. In addition, this card has a height of 113 millimeters and occupies two locks. The clock frequencies are somewhat lower on this card, the boost speed is set to 1620 MHz by default.
The cards are already in price comparison and one of the cards is already available for pre-order, so it won’t be long before they are available.
Related posts:
Leave a Reply