New EVGA EPOWER V is a separate board that provides additional power for your devices such as motherboards and graphics cards thanks to a 12 + 2-phase VRM power supply.
EVGA EPOWER V with VRM 12 + 2 phases
EVGA EPOWER V is designed with the purpose of offering two independent voltage outputs, these can be controlled when flying with its integrated EVBot MKII system that provides control to the user. This is a product that focuses on the most enthusiastic users who want to see the limits that your hardware can achieve.
SC17 EVGA Gaming Laptop With 4K Display
EVGA EPOWER V Overclocking
Intel X299 Overclocking Guide: For Intel Skylake-X and Intel Kaby Lake-X Processors
The board is powered by three 6-pin PCI Express connectors so it can provide enough extra power. Its 12 + 2-phase VRM ensures a high stability in the delivered power. So that the graphics card and the motherboard can be fed to the motherboard. perfection in the best conditions.
The following are the most noteworthy features :
EVGA X299 DARK, X299 FTW K, and X299
- Integrated VCORE and VMEM LED display – The EPOWER V has an LED display to show your VCORE and VMEM in real time.
- VMEM – Voltage adjustment range 600mV to 2300mV. The rated capacity is 80A. Peak capacity – 90A at an output voltage of 1.9V.
- VCORE – The voltage setting range is from 600mV to 2000mV. The nominal capacity is 600A. Peak capacity – 620A at the 1.85V output voltage.
- Control the EPOWER V using the built-in EVBot MKII – Use the built-in EVBOT MKII buttons to conveniently adjust your voltages on the fly. Or upgrade your firmware and connect your EVBot to control the graphics card remotely.
- USB 3.1 Type C and software controls – The EPOWER V gives you, even more, flexibility to control your voltages. Use the USB 3.1 Type C port to connect to a PC and use software to control the EPOWER V.
- – To further customize your EPOWER V, use the available DIP switches to use the remote control to control VDROOP, Force your overclock voltages, and/or Offset your voltages for the ultimate stability options.
- ProbeIT – ProbeIT connectors are one of the easiest ways to connect a device to a multimeter to read voltages without pain on demand to give you the most accurate readings when you need them.
- Fan Headers – The EPOWER V card provides the voltage and gives easy access to the fan connectors so you can also keep it cool. Use one or two 12v fans to maintain your solid rock system even during your longer benching sessions.
Source: techpowerup, EVGA