Super mCharge Fast Charging Technology From Meizu With 3000mAh Filled in 20 Minutes at 38 Degrees. Meizu every innovation can bring surprises for everyone, this SupermCharge also make Meizu in the world stage to grab a wave of the first, let us look forward to the formal business of this technology bar The
MWC domestic manufacturers this year have brought us a lot of surprises. February 28, in the MWC 2017 Meizu as we expected. Brings up a new independent research and development of a fast charge technology.
Meizu this time in the MWC 2017 brought us with the third generation of fast charging technology. According to the information announcements by Meizu, this technology uses a pump charge technology. With the use of new technology the conversion efficiency is about 98%. That provides us with a good solution to the low efficiency chargers that even causes heat problems. While the new architecture is also effective in reducing heat generation and power waste in it.
Super mCharge Uses Pump Charging Technology
Super mCharge 11V / 5A incooerates with the new high-voltage direct charge program DC Voltage Charger. The highest power rating is about a staggering 55W. While Meizu claims Super mCharge will charge up to 60% in 10 minutes only. And in 20 minutes it will fully charge batter of smartphone with capacity of 3000mAh. From the data point of view the new technology also overtake Huawei previously released SuperCharge fast charge (4.5V / 5A, the with the maximum charging power of 22.5W).
Some people are worrying that using of high power is dangerous to mobile or human health? In fact, for this purpose Meizu joins the E-Mark intelligent security chip for charging securely to provide voltage and current monitoring and adjustment mechanism in dynamic protection. In the charging test in MWC 2017 in order to verify the new technology technical data there are very interesting results.
The charging test reveals that mew charger technology fills the 3000 mAh smartphone battery and keeps the battery temperature limited to only 38 degrees. Which is even lower than the QC 3.0 fast charge solution which has temperature specifications at 44 degrees.
In addition, the Meizu also has update for data cables and charging cables as well as batteries. This new technology needs the data cable specifications as 20 V and 8 amperes current handling and supports a passing of electricity of 160W through the line.
The new batteries also guarantee about 800 of charge and discharge cycles which is still a sufficient capacity of charging cycles. To be honest, Meizu does not brought us a new technology, but this a complete set of programs.